Hadley Energy Solutions designs and installs commercial lighting control systems for offices, warehouses, schools, and industrial facilities across Louisville, KY. Modern lighting controls — occupancy sensors, daylight harvesting, scheduling, and dimming — typically cut lighting energy 30-50% on top of any LED savings. We install standalone room controls, networked building-wide systems, and full integration with building automation. Authorized integrators for Lutron, Wattstopper, nLight, and DALI-2 systems.
Any commercial building with always-on lighting, facilities required to meet ASHRAE 90.1 or IECC energy codes, warehouses with high bay lighting that runs in unoccupied aisles, offices with conference rooms, restrooms, and break rooms that sit empty most of the day, buildings with significant daylight that could offset electric lighting, and any facility pursuing LEED, ENERGY STAR, or utility rebate dollars.
Controls usually add 10-20% to a lighting project but cut lighting energy 30-50%. Cost depends on:
Lighting controls are only as good as the commissioning. Many controls projects underperform because no one programs them properly after install. We program, document, and train — and we come back at 30 days to fine-tune sensor sensitivity and time delays based on real occupant behavior.
We document your spaces, lighting loads, and the energy code requirements that apply to your project.
We specify the right control strategy per space — sensors for restrooms, daylight harvesting for perimeter offices, scheduling for warehouses.
Our licensed electricians install sensors, controllers, and low-voltage cabling, then connect to existing or new lighting circuits.
We program time-of-day, dimming levels, and sensor settings, then train your facility team on overrides and adjustments.
Hadley Energy Solutions designs, installs, and commissions lighting control systems across Louisville, Southern Indiana, and the surrounding region. We hold Kentucky Electrical Contractor License CE64623 and are authorized integrators for Lutron, nLight, Distech, and Schneider. Call (502) 921-3777.
Standalone room controls run $150-$400 per room. Networked building-wide systems run $0.50-$2.00 per square foot. Controls usually add 10-20% to a lighting project but cut lighting energy 30-50% — payback is typically 2-4 years from energy savings alone.
Both ASHRAE 90.1 and the International Energy Conservation Code (IECC) — adopted in Kentucky — require automatic shutoff, occupancy sensors in many space types, daylight responsive controls in daylit zones, and receptacle controls in offices. We design every project for code compliance.
Properly designed controls cut lighting energy 30-50% beyond LED savings. Restrooms and conference rooms with occupancy sensors save 50-70% in those spaces. Warehouses with high-bay occupancy sensors save 50-60%. Daylight harvesting in perimeter zones saves 30-40%.
Yes. LG&E's commercial energy efficiency program offers rebates for occupancy sensors, daylight controls, and networked lighting systems. Rebates often cover 30-50% of controls cost. We file all rebate paperwork on your behalf.
Yes. We integrate Lutron, nLight, and other networked lighting systems with BACnet building automation systems including Distech Controls and Schneider EcoStruxure — both of which we're authorized integrators for.
Yes. Wireless and Power-over-Ethernet (PoE) lighting control systems make retrofits practical without rewiring. We've retrofitted controls into occupied offices, schools, and warehouses with minimal disruption.
Yes. We program every system, document settings, train your staff, and return at 30 days to fine-tune sensor sensitivity and time delays based on real occupant behavior. Most failed controls projects fail because no one commissions them — we don't skip that step.
Hadley Energy Solutions, 965 Old Preston Hwy N, Louisville, KY 40229. Phone: (502) 921-3777. Email: info@hadleyenergysolutions.com. Hours: Mon–Fri 8:00 AM – 4:30 PM (Sat–Sun Closed | Emergency service available 24/7).
Licensed Kentucky contractor — Contractor CE64623 · Master Electrician ME64500 · HVAC Master HM06538. Bonded and insured. Serving Louisville, Kentucky and Southern Indiana since 2013.